Fabtech 2022-2026 Toyota Tundra 2WD/4WD 1.5 Inch Leveling Kit

FUNCTION FACTORY PERFORMANCE | FABTECH

2022-2026 Toyota Tundra 1.5 Inch Leveling Kit

Fabtech’s FTL5606 lifts the front of a 2022-2026 Tundra 1.5 in. to level the stance and make room for bigger tires. Welded steel spacers sit on top of the factory coilovers, so the truck keeps its stock ride and the coilovers never come apart. Fabtech set the spacer height at the most the front end can take without ball joint or tie rod bind anywhere in the suspension travel.

Fitment

• 2022-2026 Toyota Tundra 2WD
• 2022-2026 Toyota Tundra 4WD

Does not fit TRD Pro models. Some trucks may not sit perfectly level after install.

Features

• 1.5 in. of front lift to level the truck
• Welded front strut spacers in 1/4 in. thick steel
• Powder coated for corrosion resistance
• Works with the factory coilover assemblies, no coilover disassembly
• Engineered to avoid ball joint, tie rod, and steering bind through full travel
• High grade hardware and thread locking compound included

Tire and Wheel Fitment

Fabtech’s recommended sizes with this kit:

• 33×12.50R18 tires on 18×9 wheels with 5 in. backspacing, minor trimming
• 33×12.50R20 tires on 20×9 wheels with 5 in. backspacing, minor trimming

Installation

The front struts come out of the truck to fit the spacers, and the four studs on each strut top cap get cut down to 1/2 in. The coilovers themselves stay assembled.

• Tools: floor jack, jack stands, metric and SAE sockets, Allen wrenches, torque wrench
• Professional installation recommended
• Get a front end alignment after install and re-aim the headlights
• Check the front and rear differential fluid levels
• Re-torque all nuts, bolts, and lugs after 50 miles

Lifting a truck raises its center of gravity and changes how it handles. If you run oversized tires, check the ball joints, tie rod ends, and steering components every 2,500 to 5,000 miles. Check your state and local laws on vehicle lift before installing.

What Is Included

• 2 front strut spacers (FT70308)
• Hardware kit (FT70314): 8 M10-1.25 hex nuts, 8 3/8-16 C-lock nuts, 8 3/8 in. SAE washers, 6 cotter pins, thread locking compound
• Driver warning decal, Fabtech sticker, installation instructions, and product registration card

Documents and Manuals

• Fabtech FTL5606 Installation Instructions (PDF)

Warranty

Fabtech covers the kit with a limited lifetime warranty against defects in workmanship and materials for the original retail purchaser. Fabtech also lists this kit under its Five Sixty powertrain warranty program (5 years or 60,000 miles), which you activate by registering the truck with Fabtech online after install. Coverage terms are set by Fabtech.

Fabtech’s Trade Up rebate program covers its leveling kits too. If you later step up to a complete Fabtech suspension system, you can send this kit to Fabtech with both receipts for a rebate of what you paid for it. Eligibility and terms are set by Fabtech.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.