FFP 2017-2022 Ford F-150 Raptor “TRX Killer”

Looking for the the most power to FLY like a Raptor and blaze past any TRX in your path? We’ve got you covered! When we say power, we mean big POWER! 600 Wheel horsepower, to be exact!  Your Ford Raptor deserves the absolute best performing parts on the market and we’re putting them all together in one convenient bolt-on package.  No more piecing parts together and wondering if everything will fit.  We’ve equipped our Ford Raptor with our brand new “TRX Killer” kit to produce more than just peak power gains.  Power comes on early and we saw gains through the entire RPM range making it an absolute blast to drive. To squeeze all the power out of the stock block (650 Wheel Horse Power), we recommend Dynamic Injectors 1050x Injector upgrade, an ethanol blend tune/Methanol Injection, and SPD High-Flow Downpipes available in the Dropdown boxes.

What’s included:

Garrett Turbo 2017-2020 Ford F-150 Raptor Powermax Stage 2 Turbo Upgrade

If you’re like us, and you need more power than the stock turbos can support. Garrett’s All-New PowerMax Stage 2 upgrade turbos are for you. This turbo is designed to fit the stock location, yet provides 54% more flow over the stock ​turbos. This turbo setup will support from 400 to 700+ BHP. The 2017+ Ford F150 and Ford Raptor PowerMax are true stock-appearing bolt-on turbo upgrades. They come fully assembled for easy installation and feature fully OEM calibrated wastegate actuators. These turbos are ready to make serious horsepower in your Raptor.

Full-Race Motorsports 2017-2020 Ford F-150 Raptor EcoBoost V2 Intercooler Relocation Kit

Featuring aerodynamic cast end tanks with an updated core mounted high in the grille allows for clearance to fit a winch or aftermarket steel bumper. All-New for 2018, our V2 Intercooler is the strongest and highest flowing intercooler ever developed for the F150 EcoBoost. The result is a whopping 20% improvement in pressure drop compared to our V1 sheet metal end tank. If you’re planning to install a winch or steel bumper this upgrade is mandatory! Each and every unit is leak tested to 50 psi (even small pinhole leaks can lose power).

2011-2020 Full-Race Motorsports Ford F-150 EcoBoost Catch Can Kit

When it comes to turbocharged EcoBoost engines, no topic generates more debate than Catch Can and PCV configuration. Turbocharged Direct Injection engines inherently have a higher amount of “blow-by” that does not get washed off the valves and cylinders like a port injection engine. How do we avoid this issue to begin with? You need a good quality catch that can be located between the valve covers and the turbocharger inlet.

Full-Race Motorsports 2011-2020 Billet Aluminum Turbo Adapters

When Garrett began development on the PowerMax stage 2 upgrade turbos, it became clear the stock adaptors are way too small. Full-Race developed these to be the largest diameter and highest flowing Turbo Adapter for the EcoBoost engines.  They have over 20% more flow than competitor products.

aFe Power 2017-2020 Ford F-150 Raptor Momentum XP Alpha Raptor Cold Air Intake System

The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

aFe Power 2017-2020 Turbo Inlet Pipes 

These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction.

Xtreme-DI 2017-2020 Ford Raptor EVO HPFP 

This GDI high pressure pump was developed to replace the Bosch OEM high pressure pump. It delivers up to 63% more fuel flow when mounted on the same CAM-Lobe.
Maximum Fuel Pressure is 200bar / 2900psi with the HPFP60 250bar / 3625psi
The kit comes with everything you need: the HPFP, base plate, hardware and an electric pigtail. It is a true bolt on solution, factory inlet and High Pressure line fit. The swap can be done in your garage without any special tools.

COBB Tuning 2017-2020 Ford F-150 Raptor Ecoboost Accessport V3

The Accessport is the world’s best selling, most flexible, and easiest to use ECU upgrade solution for your Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow our staged upgrade path with pre-loaded Off The Shelf (OTS) maps or use custom mapping for any modification level. It’s the last engine management solution you’ll ever need.

PD-Tuning 2017-2020 Ford F-150 Raptor Ecoboost Custom Tune for COBB ProTune Accessport 3 (Lifetime)

What is a lifetime tuning package? Simply put the lifetime tuning option ensures you never have to pay for another tune or retune for your Cobb accessport again. No matter how many parts you change on your car you will continue to receive revisions free of charge. There are only two exceptions to this rule. One is with the addition of port injection or 6th port fueling. As these use additional controllers that also need to be calibrated. The second is with the addition of a methanol injection kit. Both additional options are available for purchase in the Ford section of the store.

While PD-Tuning remotely calibrates your vehicle you will be required to data-log multiple parameters using your Cobb Tuning Accessport V3. This enables us to see how your car is reacting to each change as if were there tuning the car in person. Each vehicle/modification list will take a different amount of time to complete no two vehicles are the same.

We’ve got your back!

Function Factory Performance takes “customer service” very personally. We understand that finding the right parts can be overwhelming. Education and awareness are the principles that keep us ahead of the curve. Let us make this experience simple, easy, and awesome, so without hesitation give us a call at (480) 576-8606, feel free to direct message on our live chat, or CLICK HERE to contact us via email.

Make sure to follow us on Instagram: @FFPerformanceAZ and Youtube.

EMAIL A FACTORY SPECIALIST FOR HELP CALL A FACTORY SPECIALIST NOW

Brand

Function Factory Performance

Ford Performance and McLaren vehicle experts. With car enthusiasts at the helm, the Factory hand selects many of its products, oftentimes putting them to work on our own Mustang, Raptor, or McLarens, and only selling those we trust. We understand the passion that goes into every part – that’s why we work to ensure that our clients are educated and empowered to make the best decisions for their high-performance vehicles.