Paragon C8 Stingray Corvette Lowering Springs by Hyperco – 1 inch
Photos Below: Lowering collars (same for Z51 cars who have lowered via spring perch) + Lowering Springs + Wheel Spacers + -3 Camber (track alignment) By […]
Paragon C8 Stingray Corvette Lowering Springs by Hyperco – 1 inch
Photos Below: Lowering collars (same for Z51 cars who have lowered via spring perch) + Lowering Springs + Wheel Spacers + -3 Camber (track alignment)
By starting work early on with Hyperco, Paragon Performance helped create a lowering spring option for the C8 Corvette cars with Mag Ride, and with or without front lift.
LOWERS 1 INCH ON ALL C8 CORVETTE CARS
The lowering spring kit offers 1 inch of lowering front and rear. Combine that with the factory adjust-ability of .75 inch lowering on Z51 cars you can achieve a total lowering of 1.75-2 inches on the Z51 cars. The spring is also 30% stiffer than factory giving increased handling without sacrificing low speed ride comfort. Cars that have front lift can use these springs and our lowering collars up front to achieve the same drop.
These have been specifically engineered to work with the factory shocks. Using 3D scanning technology the entire suspension was scanned, measured, and studied. This resulted in a spring that works with the factory shocks to maintain correct geometries while lowering the vehicle and increasing handling. Anything beyond what these springs offer would require an entire new set up, much like aftermarket coilovers.
- Fits all C8 Corvettes – (Base, Z51, Front Lift, Mag Ride – All verified @ Paragon )
- Smooth ride
- Mag Ride functions like factory
- Front Lift still functions like factory
- 1 Inch of lowering
- Z51 cars can achieve a full 1.75-2 inch drop if they choose via OEM lowering spring perch or by using our lowering collars for front lift cars.
- 30% stiffness increase over stock
- 300lbs/in Front Spring Rate – Linear
- 270lbs/in Rear Spring Rate – 350lbs/in Final Rear Spring Rate – Progressive
- Powder Coated Black for OEM like look
- Fatigue tested 140,000 jounce to rebound cycles with no issues.
- Made in USA
- Lifetime Warranty
- Works with Paragon front lift lowering collars
- Works with Paragon 20MM Wheel Spacers
* cars with all 3 ( lowering collars, spacers, and springs ) will need to run front camber of -1.5 degrees.
Related products
Available
$361.00
Available
$433.00
Available
$849.95
Backorderd - Call or Email For ETA
$399.99
Frequently Asked Questions
For made-to-order or specialty items (like carbon fiber parts or custom builds), the turnaround can take up to 8 weeks — perfection takes time.
Either way, we’ll keep you updated so you know exactly when your parts are leaving the pit lane.
If your order ships via freight, you’ll get a separate email with a direct link to the carrier’s tracking page — easy and stress-free.
If your shipment is lost, just email or call us — we’ll help track it down and guide you through the next steps to make it right.
Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community.
1st Class Service
Call
805-267-9762
or email Support@FFPerformance.coWe know car parts can be a maze — good thing we brought the map. Our team’s here to keep things smooth, simple, and maybe even a little fun.
Don’t forget to follow @FFPerformanceAZ on Instagram and YouTube.
1
Customer Support Specialist
Have a question about parts or your order? We're open Monday to Friday, 9:00 AM to 5:00 PM PST.
Your Product Is Guaranteed
Our #1 responsibility is to deliver your parts as quickly as possible.
Race Proven Knowledge.
The crew at FFP is built from real racers and car enthusiast.
Payments Verified
We verify every transaction to prevent fraud. Know that your information is safe.
Reviews
There are no reviews yet