SPD Performance 2017-2020 Ford F-150 Performance Package Exhaust

Are you looking for the ultimate performance package for your 2017 – 2020 3.5L Ecoboost F150? Look no further!

What you get in this package:

• SPD High-Performance Turbo Adapters (ADPT35)
• SPD No-CEL Catted Downpipe (DP35F1718-HFC)
• SPD Resonator Replacement
• SPD 304SS HX Series or GX Series Catback exhaust  (CB1520SS) or (GXF15SS)
• Turbo Adapters Install Kit (ADPT35IK)
• Turbo Stud Removal Socket (16023)

SPD High-Performance Turbo Adapters

SPD’s high-flow turbo exhaust adapters replace the factory adapters on the 2011-2020 F-150 3.5L Ecoboost motor.  These larger advanced adapters maximize flow, significantly reduce exhaust back pressure, and help lower exhaust gas temperatures.  We have seen 100-200-degree reductions at 65mph at the cats.  The SPD adapters have an outlet of 2.3125″ ID compared to the stock outlet of 2.0625″ ID.  Another benefit of the SPD Adapters is a reduction in turbo lag.  Customers have noticed that the turbo spool is much quicker.

This adapter is made in the USA from high-quality forged steel. It will directly bolt onto factory turbos or any other”drop-in” style aftermarket turbos that will accept stock adapters. These will also accept any factory or aftermarket down pipes.

SPD Catted Downpipes

SPD’s No CEL catted downpipes use larger 3″ diameter mandrel-bent tubing, improving throttle response, mileage, and overall performance while reducing turbo lag and exhaust temperatures. Our large diameter 400cpsi catalytic converters are designed to prevent check engine lights while offering unprecedented flow.

On all SPD Performance’s aluminized catted downpipes, you get:

• Increase in performance
• Improved turbo spool time
• Better fuel mileage
• No CEL 400 Cell Catalytic Converters
• High temp silica ceramic coated for long life span
• Factory style flanged clamps on all flared turbo and exit connections
• High grade stainless clamps for a solid seal and no leaks

SPD Resonator Delete

You get only the best with SPD’s 3″ resonator delete pipes, Which are 3″ all through with no reductions. Bolt this resonator delete pipe up to your factory downpipe or aftermarket downpipe for that performance and sound that will put your truck in a class all by itself! It comes in aluminized or 304 stainless steel.

It bolts directly to the downpipe and is a bolt-in option with SPD’s Catback systems. Cutting and welding are required on Corsa’s Catback systems.

SPD Catback Exhaust

Finding the right exhaust system used to be difficult until now! SPD Performance created a configurable Cat-Back exhaust system that goes from mild to loud while being drone-free* inside the cab. Manufactured using 304 stainless steel mandrel-bent 3″ tubing and muffler, our Cat-Back systems are designed for maximum performance and longevity. Installation is a breeze, as our systems are 100% bolt-on, with no cutting needed.

With our base system utilizing the factory resonator which gives your truck a nice growl. We recommend adding the resonator delete or performance resonator for full performance gains. The factory resonator tubing is 2 1/2 inches where there is noticeable performance gains with our true 3″ resonator delete or performance resonators.

3.5L Ecoboost with SPD Cat-Back and factory resonator:

3.5L Ecoboost with SPD Cat-Back and SPD stage 1 resonator:

3.5L Ecoboost with SPD Cat-Back and SPD resonator delete:

Due to popular requests, the following videos are with SPD catted downpipes installed.

3.5L Ecoboost with SPD Catted Downpipes, SPD Cat-Back and SPD stage 1 resonator:

3.5L Ecoboost with SPD Catted Downpipes, SPD Cat-Back, and SPD resonator delete:

Fitment:

2015 – 2020 F150 3.5L Ecoboost. Standard Cab Long Bed, Extended Cab (all bed configurations), Crew Cab (all bed configurations)

Wheelbase Fitment:

We designed the base system to fit all configurations except for the standard cab short bed. If you are ordering a resonator delete or performance resonator, make your wheelbase selection. There is no drone with the factory downpipe or SPD’s catted downpipes, but we cannot guarantee that there is no drone on other manufacturers’ downpipes.

SPD Turbo Adapter Install Kit

This is the install kit for our high-performance ADPT35 turbo adapters. It will fit F-150 3.5L Ecoboosts between 2011 and 2020, 2017-2018 F-150 Raptor HO 3.5L Ecoboosts, and 2015-2018 Ford Expeditions / Lincoln Navigators with the 3.5L Ecoboost.

This kit includes brand-new Ford OEM hardware.

4pcs    New Ford Turbo Studs
2pcs    New Ford Turbo Gaskets
4pcs    New Ford Downpipe Nuts

SPD Stud Removal Socket

The Shop Iron 3/8″ Drive Stud Extractor is ideal for removing stripped, rusted, broken, or smooth studs. The hex drive can be a driver with a wrench, ratchet, or impact tool. This tool will work effectively on 1/4″ to 1/2″ (6mm-12mm) studs.

• Fits 1/4″ to 1/2″ (6 – 12mm) studs
• Impact gun compatible
• Ideal for removing stripped, rusted, broken, or smooth studs
• Hex drive can be a driver with a wrench, ratchet, or impact tool
• Limited lifetime warranty

First Class Customer Service & Satisfaction.

At Function Factory Performance, customer service is our top priority. We know that finding the right parts can be overwhelming, so we’re here to make the process smooth and enjoyable. We’re always ahead of the curve with our commitment to education and awareness. Let’s make this experience simple and awesome together! Don’t hesitate to call us at (480) 576-8606 or click here to reach us via email.

Make sure to follow us on Instagram: @FFPerformanceAZ and Youtube.

EMAIL A FACTORY SPECIALIST FOR HELP CALL A FACTORY SPECIALIST NOW