2021-2025 Ford F-150 Carbon Fiber Center Console Shift Panel Cover - Function Factory Performance
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
Function Factory Performance
Function Factory Performance ✓ Authorized
590 products at FFP
View All

2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover

Confirmed Fit: 2021–2025 Ford F150 All
Genuine dry carbon fiber center console gear-shift panel cover for the 2021-2025 Ford F-150 (incl. Raptor). Factory-matched 2x2 twill weave under a gloss clear coat, bonds over your stock panel with pre-applied 3M adhesive — a tool-free, five-minute interior upgrade.
$179.98

or as low as $15.00/mo with Affirm

Available For Purchase
Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKUVENT-999-BKCF
BRANDFunction Factory Performance
FUNCTION FACTORY PERFORMANCE · VENT-999-BKCF
2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover

Real dry-prepreg carbon fiber over the one panel your hand touches every drive. This factory-fit center console cover replaces the dull plastic gear-shift surround on your 2021-2025 F-150 with a tight 2×2 twill weave under a deep gloss clear coat — a direct overlay that snaps the cabin from work-truck to built-truck without a single tool.

Material
Dry Prepreg Carbon Fiber
Weave
2×2 Twill / Gloss Clear Coat
Fitment
2021-2025 F-150 (incl. Raptor)
Install
3M Tape-On Overlay, No Tools

The center console is the busiest piece of trim in any truck — your hand lives on it, sun beats on it, and the factory plastic shows every scuff and fingerprint for it. This cover is laid up from genuine dry-prepreg carbon fiber, the same autoclave-cured material used on serious motorsport bodywork, then finished in a glass-smooth UV-stable clear coat. The 2×2 twill is mold-matched to the F-150's console contours, so the cut-outs for the shifter, the storage tray, and the dual cup holders all line up exactly where they should.

Because it's a precision overlay rather than a replacement panel, install is genuinely a five-minute job. The cover bonds over your existing trim with pre-applied automotive-grade adhesive — clean the surface, dry-fit, peel, and press. No clips to break, no harnesses to unplug, nothing to send to a shop. The result reads as a factory carbon-package option, not an add-on, and it ties straight into the rest of a carbon interior build.

What Sets It Apart

01

Genuine Dry Carbon

Laid up from dry-prepreg carbon fiber and clear-coated — real woven structure with depth, not a hydro-dipped or printed-plastic imitation.

02

Factory-Matched Fit

Molded to the 2021+ F-150 console with exact cut-outs for the shifter, storage tray, and dual cup holders. No trimming, no gaps.

03

Tool-Free Overlay

Bonds over your existing panel with pre-applied 3M automotive adhesive. Clean, peel, press — done in about five minutes with zero disassembly.

04

Gloss UV Clear Coat

A deep, glass-smooth clear coat protects the weave from sun fade and adds the wet-look gloss that makes carbon pop in any light.

05

High-Touch Protection

Shields the most-handled surface in the cabin from scratches, key marks, and fingerprints that wear factory plastic down fast.

06

Raptor & Non-Raptor

One cover fits the full 2021-2025 F-150 range — base trims through Raptor — for a cohesive carbon look across the lineup.

On the Truck

2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover installed

Install Notes

Park, set the brake, and let the console surface come to room temperature — adhesive bonds best on a warm, dry panel.
Thoroughly clean the factory gear-shift panel with isopropyl alcohol and let it flash off completely; any residue or oil weakens the bond.
Dry-fit the cover first without removing the liner — confirm the shifter, tray, and cup-holder cut-outs all align before committing.
Peel the 3M backing, set one edge as your reference, then press the cover down progressively to push out air pockets toward the edges.
Apply firm, even pressure across the whole surface for 30-60 seconds and avoid heavy console use for the first 24 hours while the adhesive fully cures.

Technical Specs

Spec Detail
Brand Function Factory Performance
Part Number VENT-999-BKCF
Material Dry Prepreg Carbon Fiber
Weave Pattern 2×2 Twill
Finish Gloss UV-Stable Clear Coat
Location Center Console / Gear Shift Panel
Style Factory / OEM Replacement Fitment
Installation Tape-On Overlay (3M Adhesive)
Fitment 2021-2025 Ford F-150, All Trims incl. Raptor
Sold As Single Cover (1-Piece)

Honest Pricing. Real Support.

We price this exactly where the brand sets it — no markup games — and back it with a team that actually knows these trucks. Questions on fitment before you buy? A real person answers. Free ground shipping in the contiguous US.

Fitment: Fits all 2021-2025 Ford F-150 models, including Raptor and non-Raptor trims. Direct overlay for the factory center console gear-shift panel — no modification required.

Reviews

There are no reviews yet

Be the first to review “2021-2025 Ford F-150 Dry Carbon Fiber Center Console Gear Shift Panel Cover”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762 EMAIL SUPPORT

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close