EOS 2020-2024 Chevrolet Corvette C8 Carbon Fiber Engine Bay Corner Vent Cover
- Material: Dry Pre-Preg Carbon Fiber — 3K twill weave, UV-resistant clear coat
- Installation: Direct Tape-On — Pre-applied 3M adhesive, no drilling
- Fits: 2020-2024 Corvette C8 — Stingray and Z51 Coupe
- Finish: High-Gloss Carbon Weave — UV-protected clear coat
or as low as $32.50/mo with Affirm
California Prop 65 Warning
Corvette C8 Carbon Fiber Engine Bay Corner Vent Cover
Genuine dry pre-preg carbon fiber corner vent covers for the engine bay of your 2020-2024 Corvette C8 Stingray or Z51, finished in a high-gloss 3K twill weave and installed with a direct 3M tape-on mount — no drilling or cutting.
Dry Pre-Preg Carbon Fiber . Direct Tape-On Install . No Drilling Required
Motorsport-Style Detail for the C8 Engine Bay
This corner vent cover set is molded from genuine dry pre-preg carbon fiber, precision-shaped to align with the factory engine bay contours on your 2020-2024 Corvette C8. The high-gloss finish shows off a 3K twill weave pattern under a UV-resistant clear coat, adding a motorsport accent to the rear of the mid-engine layout.
Installation is a direct tape-on job. Each cover comes with 3M automotive-grade adhesive pre-applied, so there’s no drilling, cutting, or permanent modification to the factory surface. Clean the mounting area, test fit the cover, peel the backing, and press it into place — then give the adhesive a full 24 hours to cure before the car sees heat or moisture again.
What Sets It Apart
Genuine Dry Pre-Preg Carbon Fiber
Authentic dry pre-preg carbon fiber construction for exceptional strength at an ultra-light weight.
Precision-Molded Fitment
Molded to match the factory engine bay corner contours for a clean, seamless fit.
High-Gloss 3K Twill Weave
A visible 3K twill weave pattern finished under a UV-resistant clear coat that resists yellowing and fading.
Direct Tape-On Install
Pre-applied 3M automotive-grade adhesive means no drilling or cutting to mount the covers.
Fully Reversible
No permanent modification to the factory surface — the covers install without cutting into anything.
Complements Other Carbon Fiber Trim
Matches other carbon fiber engine bay accents for a cohesive look in the engine bay.
Install Notes
- Clean the Surface — wipe the mounting area with alcohol or degreaser to remove dust, oil, and residue before fitting
- Test Fit First — test fit each cover to confirm alignment before committing to the adhesive
- Pre-Applied 3M Tape — peel the backing off the pre-applied 3M automotive-grade adhesive
- Press and Hold — position each cover over the corner panel and press firmly for full adhesion
- 24-Hour Cure — let the adhesive cure a full 24 hours before exposing it to heat or moisture
- No Drilling or Cutting — direct tape-on install that requires no permanent modification to the factory surface
- Pro Install Recommended — an installation manual is not included, so professional installation is recommended for the best alignment and finish
Technical Specs
| Specification | |
|---|---|
| Part Number | VENT-727-BKCF |
| Manufacturer | Extreme Online Store |
| Material | Dry Pre-Preg Carbon Fiber |
| Finish | High-Gloss UV-Protected Carbon Weave |
| Product Type | Engine Bay Corner Vent Cover |
| Installation | Direct Tape-On (3M Adhesive) |
| Fitment | 2020-2024 Chevrolet Corvette C8 Stingray, Z51 Coupe |
Honest pricing. Real support.
Function Factory Performance prices it at the source — no markup. Free ground shipping in the contiguous US. Questions on fitment or finish? Call, text, or chat from any FFP page — 805-267-9762, Thousand Oaks, CA.
Builds Running This Part (1)
Real installs, real reviews — from FFP customers running this part.
2 reviews for EOS 2020-2024 Chevrolet Corvette C8 Carbon Fiber Engine Bay Corner Vent Cover
You Might Also Like
Kooks Headers
ZL1 Addons
Extreme Online Store
![EOS 2020-Up Chevrolet Corvette C8 Stingray Front Splitter [Z06 / Z07 Conversion Package]](https://ffperformance.co/wp-content/uploads/2026/04/B10.1_c037ae20-db1a-4d7c-95d4-123a81ccd61e-400x400.jpg)
Extreme Online Store
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. Orders ship from our Thousand Oaks shop or direct from the manufacturer's warehouse — whichever gets it to your door faster — so lead times vary by brand and part type. We'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll confirm current availability and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762 EMAIL SUPPORTCar parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Chad Mullins (verified owner) –
Looks and fits great! Thank you!
Chad (verified owner) –
Looks great and fits great too! Thank you!