2018-2021 Jeep Wrangler JL
2020-2021 Jeep Gladiator JT
The Popular Oculus™ Bi-LED Headlights by ORACLE Lighting are now available in a ColorSHIFT™ RGB+W Color-Changing version. Oculus Headlights feature advanced focused LED projection that outshines all the competition (including the factory LED headlights). With 3,200 Lumens of high-quality Bi-LED projection, these headlights provide enhanced driver visibility in all weather conditions. Light focus is very important for driver safety and for others who can have their vision obstructed by glare. We are proud to offer the most focused & lowest-glare LED Headlights for the JL and JT on the market.
ColorSHIFT Oculus Headlights feature 3-Tiered RGB features in the lamps:
• Outer Halo Ring (RGB+W)
• Inner Halo Ring (RGB)
• Projector Demon Eye (RGB)
Each LED feature has a separate cable output and can be connected together so all 3 create the same color or set up as 3 separate Channels or “zones” depending on the user preference and the ColorSHIFT controller selected. Please note that these features are intended for off-road “show” use only and are not compliant for street use.
The Pure-White DRL has its own wiring harness (same as the original Oculus) that connects to the fuse box with an add-a-circuit for easy and safe integration. The DRL will come on when the engine is running or can be connected to a switch (including the factory Aux switches) for additional user control.
• 2x Oculus ColorSHIFT Headlights
• Headlight Aiming Tool
• DRL Wiring Harness
• Add-A-Circuit Fuse Adapter
• 6x RGB Wiring Extensions
• (RGB Controller not Included)
• Headlight Wattage: 36W
• Headlight Total Lumens: 4800LM
• Headlight Color Temp: 5500K
• Certification: DOT SAE 5839-504 HL VOR 19
• Warranty: 2 Years
|5839-334||ColorSHIFT – w/No Controller|
|5839-504-B||ColorSHIFT – w/Simple Controller|
|5839-330||ColorSHIFT – w/RF Controller|
|5839-333||ColorSHIFT – w/2.0 Controller|
|5839-335||ColorSHIFT – w/BC1 Controller|
Aim your Oculus Bi-LED Headlights in 5 simple steps:
- Park the Jeep 15-20ft. away from a wall on a flat surface.
- Measure from the ground to the center of each headlight.
- Mark the same height on the wall with tape.
- Locate the adjuster bolt on the back of each headlight covered by a rubber cap.
- Aim the cutoff lines to meet the marked spots on the wall using the supplied allen tool.
We’ve got your back!
Function Factory Performance takes “customer service” very personally. We understand that finding the right parts can be overwhelming. Education and awareness are the principles that keep us ahead of the curve. Let us make this experience simple, easy, and awesome, so without hesitation give us a call at (480) 576-8606, feel free to direct message on our live chat, or CLICK HERE to contact us via email.