or as low as $191.66/mo with Affirm
Available
BMW shipped the with conservative trim — this rear wing replaces / extends those panels with hand-laid dry carbon fiber for a real performance-style look. Through-Bolt to Trunk Lid install in 30-45 minutes, hand-built and clear-coated by RW Carbon in Anaheim, CA.
Dry Carbon Fiber · Through-Bolt · Track-Tested

The 2015-2025 runs handsomely from the factory but the corresponding trim panel is conservative. RW Carbon’s Rear Wing replaces or extends that area with genuine hand-laid dry carbon fiber, sharpening the visual aggression without changing the underlying body. Built and quality-controlled in RW’s Anaheim, California facility.
Built in Anaheim, California from real dry carbon fiber, then UV clear-coated for high-gloss shine and weather protection. Install: Through-Bolt to Trunk Lid — 30-45 minute job. Reversible: No — drilling required.
Hand-laid dry carbon fabric with the perfect resin blend — rigid, lightweight, and the deep weave you can’t fake with hydrodip or wrap.
Every spoiler gets a final clear coat for high-gloss shine and protection against UV yellowing, road salt, and weather. Stays new-looking through years of daily driving.
No drilling, no bodywork, no clips. Pre-cut RW spoiler bonds directly to the factory trunk lid via 3M VHB tape — a 10-15 minute job with basic tools.
The lip silhouette mirrors the factory M Performance accessory spoiler at a fraction of the cost — classic BMW M-styling without M Performance pricing.
Every F80 spoiler is hand-laid and quality-controlled in RW Carbon’s Southern California facility before it leaves the warehouse. No overseas drop-ship.
The 3M tape lifts cleanly with heat — if you ever want to revert to OEM (lease return, resale, restoration), the factory trunk lid is untouched.












Ceramic-coated cars: The trunk lid attachment area must be polished or buffed to remove the ceramic layer before install — 3M VHB and primer don’t bond reliably to ceramic-coated paint. Standard sealants and waxes are fine.
| Specification | |
|---|---|
| Manufacturer | RW Carbon |
| Part Number | audir803-b |
| Material | Dry Carbon Fiber (genuine, hand-laid) |
| Finish | UV Clear-Coat — high-gloss shine |
| Style | Rear Wing — OEM+ fitment |
| Vehicle | Audi R8 4S Carbon Fiber Rear Wing |
| Year Range | 2015-2025 |
| Configuration Options | Spoiler Only | Spoiler + 3M Tape and Promoter Kit (+$20) |
| Install Method | Through-Bolt to Trunk Lid (reversible) |
| Install Time | 30-45 minutes |
| Tuning Required | None |
| Built In | Anaheim, California |
No — this spoiler is shaped specifically to the F80 M3’s factory trunk lid. RW Carbon offers separate F30 trunk spoilers for non-M3 chassis. The F80 M3 trunk lid contour is M-specific.
Order the +3M Tape and Promoter kit ($20) unless you already have automotive-grade 3M VHB tape and surface primer on hand. The kit ships pre-cut for the F80 spoiler footprint — saves time and ensures correct adhesion.
Real dry carbon fiber. Hand-laid carbon fabric with rigid resin blend, then clear-coated. You can see and feel the genuine weave — this is not a printed plastic part with a carbon-look finish.
Yes. 3M VHB tape lifts cleanly with moderate heat (heat gun or hair dryer) and patient peeling. Any residue cleans off with adhesive remover — the factory trunk lid paint underneath is untouched.
The trunk lid attachment area must be polished or buffed to remove ceramic before install. 3M VHB doesn’t bond reliably to ceramic-coated paint. The rest of the car’s ceramic stays intact — only the spoiler footprint needs prep.
Yes for normal driving. RW recommends 24 hours undisturbed before driving in heavy rain or running through a car wash — gives the 3M VHB full cure time.
Function Factory Performance is an authorized RW Carbon dealer with extensive build experience. Free ground shipping in the contiguous US. Want our team to verify fitment, recommend a complementary carbon piece for the same build, or walk through install logistics? Call, text, or chat from any FFP product page — a specialist picks up.
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
or email Support@FFPerformance.co
Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet