RW Carbon 2017-2023 BMW G30 5-Series & F90 M5 CS Style Carbon Fiber Hood
or as low as $204.16/mo with Affirm
Available on backorder
BMW G30 5-Series & F90 M5 CS Style Carbon Fiber Hood
The G30 5-Series and F90 M5 left the factory with a clean but conservative hood. RW Carbon’s M5 CS-Style hood is a full carbon fiber replacement — integrated CS-spec center vent, lightweight construction, and direct OE-replacement fit. Direct bolt-on using factory hood hinges and latch. Hand-built and clear-coated in Anaheim, CA.
Dry Carbon Fiber · CS-Style Center Vent · OE Hinge Bolt-On
M5 CS-Style hood — in real dry carbon fiber, for the entire G30 / F90 range.
The factory G30 5-Series and F90 M5 hood is functional but visually flat — RW Carbon’s CS-Style hood replaces the entire panel with a hand-laid dry carbon fiber piece featuring the integrated center vent from the limited-production M5 CS. The hood shape and mounting points are shared across G30 and F90, so a single SKU fits both 530e / 530i / 540i / 550i and the F90 M5 / M5 Competition / M5 CS chassis.
Built in Anaheim, California from real dry carbon fiber, then UV clear-coated for high-gloss shine and weather protection. Install reuses the factory hood hinges and latch — no drilling, no fabrication, no body shop visit. Typical install is 60-90 minutes for a careful enthusiast. The factory hood is preserved, so you can reinstall OE for lease return or resale.
What Makes RW’s G30 / F90 Hood Different
Genuine Dry Carbon Fiber
Hand-laid dry carbon fabric with the perfect resin blend — rigid, lightweight, and the deep weave you can’t fake with hydrodip or wrap.
UV Clear-Coat Protection
Every spoiler gets a final clear coat for high-gloss shine and protection against UV yellowing, road salt, and weather. Stays new-looking through years of daily driving.
Direct OE Hinge Bolt-On
Mounts to factory hood hinges and latch using OE hardware. No drilling, no fabrication, no body shop. 60-90 minute job with two people and basic tools.
Performance Style Profile
The lip silhouette mirrors the factory M Performance accessory spoiler at a fraction of the cost — M5 CS-spec aggression without the limited-production M5 CS price.
Hand-Built in Anaheim, CA
Every F80 spoiler is hand-laid and quality-controlled in RW Carbon’s Southern California facility before it leaves the warehouse. No overseas drop-ship.
Direct Bolt-On
Mounts to factory hood hinges and latch using included OE hardware. Unbolt to revert to the factory hood — OE hood is preserved and untouched.
Inside The Build
60-90 Minute Direct Bolt-On Install
Direct hinge-and-latch install — preserves OE hood:
- Factory hood hinges — reuses OE mounting hardware
- Factory latch — OE hood release works without modification
- 60-90 minute job — two-person install with basic hand tools
- Reversible — bolt the OE hood back on for lease return or resale
- Two-person job — the hood is large; one person to align, one to bolt
- Hood prop — OE gas struts work with the carbon hood (similar weight)
- No tuning required — cosmetic part, no ECU work
- Recommended — final fit and gap adjustment by a body shop is optional but recommended
Paint matching: The carbon hood ships with a clear-coat finish over exposed weave. If you want body-color paint matching, plan a body shop visit for prep and paint — the carbon substrate accepts automotive paint cleanly. Most customers run the visible carbon look for the OEM+ aesthetic.
Technical Specs
| Specification | |
|---|---|
| Manufacturer | RW Carbon |
| Part Number | bmwf90038 |
| Material | Dry Carbon Fiber (genuine, hand-laid) |
| Finish | UV Clear-Coat — high-gloss shine |
| Style | M5 CS-Style Hood with Integrated Center Vent |
| Vehicle | BMW G30 5-Series + F90 M5 (Sedan) |
| Year Range | 2017-2023 |
| Configuration Options | Single SKU — ships as a complete CS-Style hood |
| Install Method | Direct bolt-on to factory hood hinges + latch (reversible) |
| Install Time | 60-90 minutes |
| Tuning Required | None |
| Built In | Anaheim, California |
FAQ
Will it fit ALL G30 5-Series trims?
Yes — this hood fits the entire G30 5-Series range (530e, 530i, 540i, 550i) plus the F90 M5 / M5 Competition / M5 CS. Same hood architecture across the chassis. The M5 CS-Style center vent gives non-M5 trims an instant performance upgrade visually.
Will it work with my factory hood gas struts?
Yes — the dry carbon hood weight is comparable to the factory aluminum hood, so the OE gas struts hold the hood open without modification. No need for upgraded struts or shocks.
Is this real carbon fiber or hydrodip / wrap?
Real dry carbon fiber. Hand-laid carbon fabric with rigid resin blend, then UV clear-coated. You can see and feel the genuine 2×2 weave — this is a structural carbon part, not a hydrodip or wrap.
Will it remove cleanly if I sell the car or go back to stock?
Yes. The carbon hood unbolts at the factory hinges and latch — the OE hood you remove is preserved. Refit OE in 60-90 minutes if you ever need to revert for lease return or resale.
Does this require any body shop work?
No required body shop work — the hood bolts on as a direct replacement. Optional body shop steps include final fitment / gap adjustment and body-color paint matching if you don’t want the visible carbon look. Most customers leave the carbon visible.
Will the hood scoop affect engine cooling?
The integrated CS-Style center vent is functional — helps relieve under-hood heat. Performance impact is modest on stock cars and meaningful on tuned F90 M5 builds running higher charge-air temps.
Authorized RW Carbon Dealer. G30 5-Series & F90 M5 Specialists.
Function Factory Performance is an authorized RW Carbon dealer with extensive G-chassis 5-Series and F90 M5 build experience. Free ground shipping in the contiguous US. Want our team to verify the hood fits your specific G30 trim or F90 M5 build, walk through install logistics, or pair with a CS-Style front lip and trunk spoiler for the full carbon build? Call, text, or chat from any FFP product page — a G30 / F90 specialist picks up.
You Might Also Like
Anderson Composites
Anderson Composites
Anderson Composites
Anderson Composites
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762 EMAIL SUPPORTCar parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet