RW Carbon BMW Carbon Fiber Fuel Cap Cover
or as low as $5.41/mo with Affirm
12 In Stock Build To Order - 480 576 8606
BMW Carbon Fiber Fuel Cap Cover
BMW shipped the F90016 with conservative trim — this carbon fiber part replaces / extends those panels with hand-laid dry carbon fiber for a real performance-style look. Direct Replacement install in 15-30 minutes, hand-built and clear-coated by RW Carbon in Anaheim, CA.
Dry Carbon Fiber · Hand-Built USA · OEM Fitment
Real dry carbon fiber upgrade — OEM-style fitment.
The F90016 2015-2025 runs handsomely from the factory but the corresponding trim panel is conservative. RW Carbon’s Carbon Fiber Part replaces or extends that area with genuine hand-laid dry carbon fiber, sharpening the visual aggression without changing the underlying body. Built and quality-controlled in RW’s Anaheim, California facility.
Built in Anaheim, California from real dry carbon fiber, then UV clear-coated for high-gloss shine and weather protection. Install: Direct Replacement — 15-30 minute job. Reversible: 100% — oe part preserved.
What Makes RW’s Carbon Fiber Part Different
Genuine Dry Carbon Fiber
Hand-laid dry carbon fabric with the perfect resin blend — rigid, lightweight, and the deep weave you can’t fake with hydrodip or wrap.
UV Clear-Coat Protection
Every spoiler gets a final clear coat for high-gloss shine and protection against UV yellowing, road salt, and weather. Stays new-looking through years of daily driving.
3M Tape Adhesive Install
No drilling, no bodywork, no clips. Pre-cut RW spoiler bonds directly to the factory trunk lid via 3M VHB tape — a 10-15 minute job with basic tools.
Performance Style Profile
The lip silhouette mirrors the factory M Performance accessory spoiler at a fraction of the cost — classic BMW M-styling without M Performance pricing.
Hand-Built in Anaheim, CA
Every F80 spoiler is hand-laid and quality-controlled in RW Carbon’s Southern California facility before it leaves the warehouse. No overseas drop-ship.
100% Reversible
The 3M tape lifts cleanly with heat — if you ever want to revert to OEM (lease return, resale, restoration), the factory trunk lid is untouched.
Inside The Build
Direct OE Replacement Install
Tape-on adhesive install — preserves all factory surfaces:
- 3M VHB tape adhesive — bonds directly to factory paint, no clips or fasteners
- No drilling — trunk lid is not modified, no body work required
- 10-15 minute job — clean surface, peel backing, press into position
- Reversible — tape lifts cleanly with heat if you ever revert to OEM
- Tools needed — isopropyl alcohol wipe, masking tape for alignment, pressure
- Cure time — 24 hours undisturbed before driving in rain or washing
- No tuning required — cosmetic part, no ECU work
- Surface temp — install above 60°F for best 3M adhesion
Ceramic-coated cars: The trunk lid attachment area must be polished or buffed to remove the ceramic layer before install — 3M VHB and primer don’t bond reliably to ceramic-coated paint. Standard sealants and waxes are fine.
Technical Specs
| Specification | |
|---|---|
| Manufacturer | RW Carbon |
| Part Number | bmwf90016 |
| Material | Dry Carbon Fiber (genuine, hand-laid) |
| Finish | UV Clear-Coat — high-gloss shine |
| Style | Carbon Fiber Part — OEM+ fitment |
| Vehicle | BMW Carbon Fiber Fuel Cap Cover |
| Year Range | 2015-2025 |
| Configuration Options | Spoiler Only | Spoiler + 3M Tape and Promoter Kit (+$20) |
| Install Method | Direct Replacement (reversible) |
| Install Time | 15-30 minutes |
| Tuning Required | None |
| Built In | Anaheim, California |
FAQ
Will it fit my F30 335i / 340i?
No — this spoiler is shaped specifically to the F80 M3’s factory trunk lid. RW Carbon offers separate F30 trunk spoilers for non-M3 chassis. The F80 M3 trunk lid contour is M-specific.
Should I order the Trunk Spoiler Only or the +3M Tape kit?
Order the +3M Tape and Promoter kit ($20) unless you already have automotive-grade 3M VHB tape and surface primer on hand. The kit ships pre-cut for the F80 spoiler footprint — saves time and ensures correct adhesion.
Is this real carbon fiber or hydrodip / wrap?
Real dry carbon fiber. Hand-laid carbon fabric with rigid resin blend, then clear-coated. You can see and feel the genuine weave — this is not a printed plastic part with a carbon-look finish.
Will it remove cleanly if I sell the car or go back to stock?
Yes. 3M VHB tape lifts cleanly with moderate heat (heat gun or hair dryer) and patient peeling. Any residue cleans off with adhesive remover — the factory trunk lid paint underneath is untouched.
What if my car is ceramic coated?
The trunk lid attachment area must be polished or buffed to remove ceramic before install. 3M VHB doesn’t bond reliably to ceramic-coated paint. The rest of the car’s ceramic stays intact — only the spoiler footprint needs prep.
Can I drive immediately after install?
Yes for normal driving. RW recommends 24 hours undisturbed before driving in heavy rain or running through a car wash — gives the 3M VHB full cure time.
Authorized RW Carbon Dealer. F90016 Specialists.
Function Factory Performance is an authorized RW Carbon dealer with extensive F90016 build experience. Free ground shipping in the contiguous US. Want our team to verify fitment, recommend a complementary F90016 carbon piece for the same build, or walk through install logistics? Call, text, or chat from any FFP product page — a F90016 specialist picks up.
You Might Also Like
Anderson Composites
Seibon Carbon
Anderson Composites
Anderson Composites
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762or email Support@FFPerformance.co
Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet