RW Carbon F80 M3 / F82 F83 M4 GTS for 2014-2026 BMW M4 | FFP
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
RW Carbon
RW Carbon ✓ Authorized
1426 products at FFP
View All

RW Carbon BMW F80 M3 / F82 F83 M4 GTS Style CF Hood

Material
Carbon Fiber
Installation
Bolt-on
$2,199.95

or as low as $183.33/mo with Affirm

Verified In Stock Inventory Confirmed • Money-Back Guarantee

2 In Stock Build To Order - 480 576 8606

Questions about this part?

Talk to a builder who installs these daily. Free advice, no pressure.

805-267-9762
Free consultation Same-day quotes Expert install
Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKU: bmwf8x024 Brand: RW Carbon





RW Carbon  /  F8

BMW F80 M3 / F82 F83 M4 GTS Style CF Hood

BMW shipped the F8 with conservative trim — this hood replaces / extends those panels with hand-laid dry carbon fiber for a real performance-style look. Direct OE Hinge Bolt-On install in 60-90 minutes, hand-built and clear-coated by RW Carbon in Anaheim, CA.

Dry Carbon Fiber  ·  Direct Bolt-On  ·  OE Hinges

RW Carbon BMW F80 M3 / F82 F83 M4 GTS Style CF Hood

Material
Dry Carbon Fiber Hand-laid, UV clear-coated
Fits
F8 2015-2025
Install
Bolt-On OE hood hinges + latch
Reversible
Reversible Reinstall OE hood any time

01  /  The Pitch

Real dry carbon fiber hood — bolts to factory hinges.

The F8 2015-2025 runs handsomely from the factory but the corresponding trim panel is conservative. RW Carbon’s Hood replaces or extends that area with genuine hand-laid dry carbon fiber, sharpening the visual aggression without changing the underlying body. Built and quality-controlled in RW’s Anaheim, California facility.

Built in Anaheim, California from real dry carbon fiber, then UV clear-coated for high-gloss shine and weather protection. Install: Direct OE Hinge Bolt-On — 60-90 minute job. Reversible: Reversible — reinstall oe hood any time.

02  /  Features & Benefits

What Makes RW’s Hood Different

01

Genuine Dry Carbon Fiber

Hand-laid dry carbon fabric with the perfect resin blend — rigid, lightweight, and the deep weave you can’t fake with hydrodip or wrap.

02

UV Clear-Coat Protection

Every spoiler gets a final clear coat for high-gloss shine and protection against UV yellowing, road salt, and weather. Stays new-looking through years of daily driving.

03

3M Tape Adhesive Install

No drilling, no bodywork, no clips. Pre-cut RW spoiler bonds directly to the factory trunk lid via 3M VHB tape — a 10-15 minute job with basic tools.

04

Performance Style Profile

The lip silhouette mirrors the factory M Performance accessory spoiler at a fraction of the cost — classic BMW M-styling without M Performance pricing.

05

Hand-Built in Anaheim, CA

Every F80 spoiler is hand-laid and quality-controlled in RW Carbon’s Southern California facility before it leaves the warehouse. No overseas drop-ship.

06

100% Reversible

The 3M tape lifts cleanly with heat — if you ever want to revert to OEM (lease return, resale, restoration), the factory trunk lid is untouched.

03  /  Product Gallery

Inside The Build

04  /  Install Compatibility

60-90 Minute Direct Bolt-On Install

Tape-on adhesive install — preserves all factory surfaces:

  • 3M VHB tape adhesive — bonds directly to factory paint, no clips or fasteners
  • No drilling — trunk lid is not modified, no body work required
  • 10-15 minute job — clean surface, peel backing, press into position
  • Reversible — tape lifts cleanly with heat if you ever revert to OEM
  • Tools needed — isopropyl alcohol wipe, masking tape for alignment, pressure
  • Cure time — 24 hours undisturbed before driving in rain or washing
  • No tuning required — cosmetic part, no ECU work
  • Surface temp — install above 60°F for best 3M adhesion

Ceramic-coated cars: The trunk lid attachment area must be polished or buffed to remove the ceramic layer before install — 3M VHB and primer don’t bond reliably to ceramic-coated paint. Standard sealants and waxes are fine.

05  /  Specifications

Technical Specs

Specification
Manufacturer RW Carbon
Part Number bmwf8x024
Material Dry Carbon Fiber (genuine, hand-laid)
Finish UV Clear-Coat — high-gloss shine
Style Hood — OEM+ fitment
Vehicle BMW F80 M3 / F82 F83 M4 GTS Style CF Hood
Year Range 2015-2025
Configuration Options Spoiler Only  |  Spoiler + 3M Tape and Promoter Kit (+$20)
Install Method Direct OE Hinge Bolt-On (reversible)
Install Time 60-90 minutes
Tuning Required None
Built In Anaheim, California

06  /  Frequently Asked

FAQ

Will it fit my F30 335i / 340i?

No — this spoiler is shaped specifically to the F80 M3’s factory trunk lid. RW Carbon offers separate F30 trunk spoilers for non-M3 chassis. The F80 M3 trunk lid contour is M-specific.

Should I order the Trunk Spoiler Only or the +3M Tape kit?

Order the +3M Tape and Promoter kit ($20) unless you already have automotive-grade 3M VHB tape and surface primer on hand. The kit ships pre-cut for the F80 spoiler footprint — saves time and ensures correct adhesion.

Is this real carbon fiber or hydrodip / wrap?

Real dry carbon fiber. Hand-laid carbon fabric with rigid resin blend, then clear-coated. You can see and feel the genuine weave — this is not a printed plastic part with a carbon-look finish.

Will it remove cleanly if I sell the car or go back to stock?

Yes. 3M VHB tape lifts cleanly with moderate heat (heat gun or hair dryer) and patient peeling. Any residue cleans off with adhesive remover — the factory trunk lid paint underneath is untouched.

What if my car is ceramic coated?

The trunk lid attachment area must be polished or buffed to remove ceramic before install. 3M VHB doesn’t bond reliably to ceramic-coated paint. The rest of the car’s ceramic stays intact — only the spoiler footprint needs prep.

Can I drive immediately after install?

Yes for normal driving. RW recommends 24 hours undisturbed before driving in heavy rain or running through a car wash — gives the 3M VHB full cure time.

07  /  Why FFP

Authorized RW Carbon Dealer. F8 Specialists.

Function Factory Performance is an authorized RW Carbon dealer with extensive F8 build experience. Free ground shipping in the contiguous US. Want our team to verify fitment, recommend a complementary F8 carbon piece for the same build, or walk through install logistics? Call, text, or chat from any FFP product page — a F8 specialist picks up.

Fitment Confirmed
2015-2025 BMW F80 M3 / F82 F83 M4 GTS Style CF Hood. Hood shaped specifically to OEM contours. Direct OE Hinge Bolt-On install.

Material Carbon Fiber
Installation Bolt-on

Reviews

There are no reviews yet

Be the first to review “RW Carbon BMW F80 M3 / F82 F83 M4 GTS Style CF Hood”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762

or email Support@FFPerformance.co

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close