RW Carbon BMW G06 X6 LCI Performance Style Carbon Fiber Front Lip
or as low as $66.66/mo with Affirm
1 in stock (can be backordered)
BMW G06 X6 LCI Performance Style Carbon Fiber Front Lip
The G06 X6 LCI got a refreshed front fascia in 2024 — sharper lines, but a still-conservative lower bumper. RW Carbon’s Performance Style front lip drops onto the factory bumper in genuine hand-laid dry carbon fiber, adding aggressive front-end aero to the LCI’s new face. Bolt-on install using factory mounting points and included hardware. Hand-built in Anaheim, CA.
Dry Carbon Fiber · Direct Bolt-On · G06 X6 LCI Specific
Aggressive front-end aero for the new G06 X6 LCI — in real dry carbon fiber.
The G06 X6 received its mid-cycle facelift (LCI) in 2024 with reshaped headlights and a redesigned front fascia. RW Carbon’s Performance Style front lip is shaped specifically to the LCI bumper geometry — it will not fit pre-LCI G06 X6 (2019-2023) bumpers. The lip mounts to factory attachment points using the included hardware, in genuine hand-laid dry carbon fiber.
Built in Anaheim, California from real dry carbon, then UV clear-coated for high-gloss shine and weather protection. Install is direct bolt-on at factory front bumper attachment points using included hardware — 30-45 minute job with basic tools. No drilling, no fabrication. Reverse the install to revert to OEM at any time without modifying the factory bumper.
What Makes RW’s G06 LCI Lip Different
Genuine Dry Carbon Fiber
Hand-laid dry carbon fabric with the perfect resin blend — rigid, lightweight, and the deep weave you can’t fake with hydrodip or wrap.
UV Clear-Coat Protection
Every spoiler gets a final clear coat for high-gloss shine and protection against UV yellowing, road salt, and weather. Stays new-looking through years of daily driving.
Direct Bolt-On Install
Mounts to factory bumper attachment holes using included hardware. No drilling, no fabrication, no body shop visit. 30-45 minute job with basic tools.
Performance Style Profile
The lip silhouette mirrors the factory M Performance accessory spoiler at a fraction of the cost — M Performance presence on the new LCI fascia.
Hand-Built in Anaheim, CA
Every F80 spoiler is hand-laid and quality-controlled in RW Carbon’s Southern California facility before it leaves the warehouse. No overseas drop-ship.
100% Reversible
The 3M tape lifts cleanly with heat — if you ever want to revert to OEM (lease return, resale, restoration), the factory trunk lid is untouched.
Inside The Build
30-45 Minute Direct Bolt-On Install
Direct bolt-on install — preserves all factory surfaces:
- Factory mounting points — uses OEM front bumper attachment locations
- Included hardware — mounting bolts and clips ship with the lip
- 30-45 minute job — standard hand tools (10mm socket, T25 Torx)
- Reversible — unbolt to revert to OEM, factory bumper is untouched
- No drilling — factory bumper is not modified
- No body work — factory paint preserved on the bumper
- No tuning required — cosmetic part, no ECU work
- LCI-specific geometry — will not fit pre-LCI 2019-2023 G06 X6
Pre-LCI X6 owners: This lip is shaped exclusively for the 2024-2025 G06 X6 LCI front bumper. It will NOT fit 2019-2023 pre-LCI G06 X6. RW Carbon offers a separate front lip for pre-LCI X6 chassis — contact us if you have a pre-LCI car.
Technical Specs
| Specification | |
|---|---|
| Manufacturer | RW Carbon |
| Part Number | bmwg06010 |
| Material | Dry Carbon Fiber (genuine, hand-laid) |
| Finish | UV Clear-Coat — high-gloss shine |
| Style | Performance Style Front Lip / G06 LCI-Specific Geometry |
| Vehicle | BMW G06 X6 LCI (mid-cycle facelift) |
| Year Range | 2024-2025 |
| Configuration Options | Single SKU — ships as a complete LCI front lip |
| Install Method | Direct bolt-on to factory mounting points (reversible) |
| Install Time | 30-45 minutes |
| Tuning Required | None |
| Built In | Anaheim, California |
FAQ
Will it fit my pre-LCI 2019-2023 X6?
No — the LCI face received a redesigned front bumper in 2024 with different geometry. This lip is specific to the 2024-2025 G06 X6 LCI bumper. For pre-LCI X6 chassis, RW Carbon offers separate front lip designs — reach out to FFP and we’ll point you to the right one.
Will the lip clear factory parking sensors?
Yes — the lip is shaped to mount below the factory parking sensor housings. Sensor function is unaffected.
Is this real carbon fiber or hydrodip / wrap?
Real dry carbon fiber. Hand-laid carbon fabric with rigid resin blend, then UV clear-coated. You can see and feel the genuine weave — this is a structural carbon part, not a printed plastic part with a carbon-look finish.
Will it remove cleanly if I sell the car or go back to stock?
Yes. The lip unbolts at the factory mounting points and the OE front bumper is preserved. Reversal takes about as long as the original install — 30-45 minutes.
Will it lower the front-end ground clearance?
The lip extends about 2-3 inches forward and 1 inch lower than the factory bumper edge. On stock-height G06 X6 LCI, factory ground clearance is preserved within normal driving (driveways, speed bumps), but very low-speed approach angles (steep parking ramps, curbs) may need extra care. Consider a SlipLo guard if you regularly hit aggressive driveways.
Can I drive immediately after install?
Yes — once the lip is bolted in and the mounts are torqued, it’s ready for normal driving including rain and car washes.
Authorized RW Carbon Dealer. G06 X6 / G-Chassis Specialists.
Function Factory Performance is an authorized RW Carbon dealer with extensive G-chassis BMW build experience. Free ground shipping in the contiguous US. Want to add the matching G06 X6 DTM rear diffuser, side skirt extensions, or other carbon pieces to complete the build? Call, text, or chat from any FFP product page — a G-chassis specialist picks up.
You Might Also Like
Anderson Composites
Anderson Composites
Anderson Composites
Anderson Composites
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762 EMAIL SUPPORTCar parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet