Turbosmart 2020-2025 Ford Explorer EcoBoost 3.0L V6 | FFP
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
Turbosmart
Turbosmart ✓ Authorized
592 products at FFP
View All

Turbosmart 2020-2025 Ford Explorer EcoBoost 3.0L V6 (Non-ST) BOV Kompact Dual Port VR26

  • Direct OEM-replacement BOV — same flange, same connector, same ECU compatibility
  • Dual-Port architecture — full recirc + partial atmospheric vent on demand
  • Billet aluminum body — replaceable diaphragm, no plastic failure points
  • VR26 tuning — spec'd for the Explorer 3.0L V6 non-ST compressor map
  • No tune required — preserves factory drivability + ECU behavior

Fits: 2020-2025 Ford Explorer EcoBoost 3.0L V6 (excluding ST). For the Explorer ST, use TS-0223-1096 (VR13).

$593.99

or as low as $49.50/mo with Affirm

Available on Backorder

Backordered - Call or Email For ETA

Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKU: TS-0223-1051 Brand: Turbosmart
TURBOSMART · KOMPACT DUAL PORT VR26

2020-2025 Ford Explorer EcoBoost V6 (Non-ST) BOV

Direct OEM-replacement blow-off valve for the standard Ford Explorer 3.0L EcoBoost V6 (non-ST trims). Plug-and-play install, electronically actuated, retains stock recirc + atmospheric vent on demand. Tuned to the OEM compressor map for the Explorer 3.0L V6 platform — not the 2.3L EcoBoost or 3.0L ST, those use different VR-spec valves.

VR26Vacuum Reference Spec
DUALPort Recirc + Vent
DIRECTOEM Replacement

Why Replace Your OEM BOV

The factory OEM blow-off valve on the Explorer EcoBoost V6 is plastic-housed and prone to diaphragm failure under any boost increase. Once it leaks, you lose boost, you lose responsiveness, and the engine pulls timing under what should be normal driving. Turbosmart’s Kompact Dual Port is the OEM-fit solution: same flange, same connector, same ECU compatibility — but a billet body, replaceable diaphragm, and dual-port architecture that lets you tune the recirculation/atmospheric ratio.

Dual-Port means: full recirc back into the inlet (stock-quiet, factory-friendly drivability) plus a partial atmospheric vent for the audible “pshhh” under heavy boost. You get the best of both setups in one valve.

Specifications

Property Spec
Manufacturer Part # TS-0223-1051
VR Spec VR26 (Explorer EcoBoost V6 non-ST)
Type Kompact EM Dual Port (Recirc + Atmospheric)
Body Billet aluminum housing, replaceable diaphragm
Mount Direct OEM bolt-on — factory flange & connector
Compatible Vehicle 2020-2025 Ford Explorer EcoBoost 3.0L V6 (excludes ST trims)
Tune Required No — OEM-spec recirculation, factory drivability preserved
Dimensions 7.1″ × 5″ × 3″, 1.5 lb shipping weight
Warranty Turbosmart standard manufacturer warranty

What’s Included

1× Turbosmart Kompact Dual Port BOV — assembled, ready to install
OEM connector + mounting hardware — direct factory fitment
Turbosmart install instructions — printed reference
Manufacturer warranty — backed by Turbosmart Australia
⚠ Fitment Note — Important

This is the VR26-spec valve, tuned specifically for the 2020-2025 Ford Explorer EcoBoost 3.0L V6 (non-ST). It will NOT fit:

• Explorer ST 3.0L (use TS-0223-1096 / VR13)
• 2.3L EcoBoost Mustang or other 4-cyl applications
• Pre-2020 Explorer chassis

If you’re unsure which VR your turbo runs, call us before ordering — we keep a Turbosmart fitment chart for every Ford EcoBoost application.

Questions On Fitment?

Talk to a Ford EcoBoost specialist for confirmation before you order.

CALL FFP · (805) 267-9762

Reviews

There are no reviews yet

Be the first to review “Turbosmart 2020-2025 Ford Explorer EcoBoost 3.0L V6 (Non-ST) BOV Kompact Dual Port VR26”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762 EMAIL SUPPORT

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close