The NEW UPR Plug N Play ™ Dual Valve Catch Can system perfectly fits your new Ranger Raptor 3.0! By adding a second vacuum source and a Clean Side Separator, the UPR Dual Valve Catch Can system enhances the performance of the PCV system throughout the RPM range.

The Dual Valve catch can separate oil mist and combustion byproducts during low-speed driving and idle (when a manifold vacuum is present). Still, it will also allow circulation and crankcase evacuation when under BOOST. The UPR Clean Side Separator reduces oil intrusion into the intercooler and air box.

Easy to service with UPR’s Billet bracket technology and Plug N Play ™ quick-release factory-style fittings. Just push the grey buttons on the fittings to release them, and unscrew the quick-release catch can mount knob to remove the can. The base cup unscrews from the catch can for easy draining and inspection.

With its highly efficient compact design and incredible looks, We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled, emptied, and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible- No cheap stock lines here that have been cut and spliced on or hardware store rubber hose! Featuring the New UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the catch can lines from your engine. (UPR Exclusive Push Button Fittings) We have hundreds of hours testing our new Multi-Stage Oil Separator to ensure proven results exceed your expectations. 4 ounces will give you the needed oil capacity to be sure the catch can not overfill.

This new patented design has the most advanced internal function. From coalescing to condensing, every aspect was engineered properly. It cannot be compared or confused with units with side-by-side inlets and outlets with ineffective flimsy filters or air compressor filters to keep the cost down and never consider how critical the separation process is. At UPR, ensure that the best diffuser systems available protect this feature and process of the catch cans’ performance. UPR’s Patented Multi-chamber diffuser technology is featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. It is manufactured from Domestic T-6 6061 Aluminum bar stock and finished using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

Every UPR Catch Can is designed, tested, and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. We continually improve our designs to stay ahead of the competition and give you the cutting-edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures from which cheap plastic fittings suffer.

The UPR catch can kit is ready to install as-is. We offer upgrades that you can select to tailor the kit to your needs.

Upgrades available:

UPR Billet Pro Series Check Valves are larger and flow higher than the standard check valves included in the base kit. The higher flow will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low-speed drivability. A Dual Valve catch can kit will require 2 check valves.

The Stainless Steel magnetic drain plug would replace the standard drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material so the user can inspect it.

The UPR drain line kit includes a drain valve, hose, and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area.

Choose the stainless steel magnetic drain plug or the UPR drain line kit; you will not need both.