This battery-mounted single-valve catch can kit for the 23-24 F150 Raptor R is the perfect fit for your engine bay. With its highly efficient compact design and incredible good looks, We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible- No cheap stock lines here that have been cut and spliced on! Featuring the New UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the catch can or catch can lines from your engine, or with UPR Exclusive Push Button Fittings, you can remove the entire catch can system easily for service if need be. No drilling, no cutting, so your truck can be returned 100% to stock in minutes. We have hundreds of hours testing our new Multi-Stage Oil Separator to ensure proven results will exceed your expectations. We even have the most significant oil capacity for a compact, highly efficient internal diffuser system. 4 ounces will give you the needed oil capacity to be sure the catch can not overfill.
This new patented design is the most advanced Internal function. From coalescing to condensing, every aspect was engineered properly. It cannot be compared or confused with units that have side-by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. At UPR, make sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR’s Patented Multi-chamber diffuser technology is featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.
Every UPR Catch Can is designed, tested, and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. We continually improve our designs to stay ahead of the competition and give you the cutting-edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on our products. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.
THIS PART DOES NOT CARRY AN CARB EO NUMBER AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
2023-2024 F150 Raptor R Clean Side Separator (optional)
Upgrade your existing catch can system with the UPR Clean Side Separator. Includes UPR Plug n Play Fittings to allow you to install the UPR Clean Side Catch Separator without any modifications. A simple plug-and-play system that will outperform anything available. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. We continually improve our designs to stay ahead of the competition and give you the cutting-edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on our products.
This Clean Side Catch Separator is especially beneficial to modified trucks or trucks with added Superchargers or Turbo kits. As crankcase pressure builds up under BOOST, it will be forced out of the driver-side valve cover fitting. This clean side separator will still allow clean air to enter the crankcase as the factory intended but will catch oil and impurities when the crankcase pressure is high, preventing that gunk from getting into your cold air kit and throttle body. Once regular driving resumes, the Clean Side Separator will allow the oil mist to return to the crankcase.
The UPR Dual Valve Catch Can kit is ready to install out of the box. You can choose upgrades for your catch can kit to tailor it to your truck. They are available through the drop-down menus.
UPR Billet Pro Series Check Valves:
These are more significant, higher flowing check valves than the standard check valves. It will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low-speed drivability.
UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as they allow crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.
UPR SS Magnetic Drain Plug:
The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.
UPR Catch Can Drain Line Kit:
The drain line kit includes a drain valve, hose, and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access, like the wheel well opening or bumper area.
**You would select either the Stainless Steel Magnetic Drain Plug or The Catch Drain Line Kit, not both.
- Show Quality Finish
- Plug N Play ™ fittings
- Prevents Oil from Entering Intake
- Exclusive 4 Stage Design Traps Oil
- Innovative Diffuser Tube and Chamber
- Can Measures 2.5″ x 5″ 6oz Capacity
- High-Quality CNC Machined Billet Aluminum
- 5/8″ Oil Resistant Continental Braided Hose included
- Improves Fuel Economy, Throttle Response & Performance
- High-Quality Billet Aluminum Catch Can Fittings (Not Plastic Like the Competition)
- Black Anodized Finish
We’ve got your back!
Function Factory Performance takes “customer service” very personally. We understand that finding the right parts can be overwhelming. Education and awareness are the principles that keep us ahead of the curve. Let us make this experience simple, easy, and excellent, so without hesitation, give us a call at (480) 576-8606. Feel free to direct message on our live chat or CLICK HERE to contact us via email.