Whipple 2024 Ford Mustang GT/Darkhorse Stage 1 Gen 6 3.0L Supercharger Kit

WHIPPLE SUPERCHARGERS GEN 6 3.0L POWERS THE S650 MUSTANG UP TO 810HP

Elevate Your Mustang Experience: Experience the pinnacle of performance with the 2024 Ford Mustang GT and Dark Horse, now equipped with the groundbreaking Whipple Gen 6 3.0L supercharger. This combination transforms your Mustang into an unrivaled performance titan, delivering breathtaking power and torque. Unleash an exhilarating up to *810HP and 640 ft-lb of torque, setting new standards in automotive performance. Experience the thrill of driving a true powerhouse with the 2024 Ford Mustang GT and Dark Horse equipped with the Whipple Gen 6 3.0L supercharger.

Unleash Unmatched Power with Enhanced Airflow: The 2024 Ford Mustang, when equipped with the Whipple Gen 6 3.0L supercharger, boasts impressive horsepower and a state-of-the-art air intake system. This system includes two high-performance air filters and a massive Y intake setup, allowing for unparalleled free flow of air into the supercharger. The new 120mm supercharger inlet further elevates the efficiency of this setup, compatible with 92mm, 112mm, and 120mm throttle bodies. This revised design optimizes airflow and air speed, significantly enhancing the power potential of the 2024 Coyote engine.

Innovative Supercharger Technology: The 6th generation Whipple Supercharger is a breakthrough in supercharger design. Its unique rotor profile and advanced port shape significantly enhance supercharger efficiency, offering a transformative driving experience far beyond the capabilities of our 5th-generation models. Adrenaline-Inducing Performance: Experience the raw power of the 2024 Ford Mustang 5.0L S650 GT and Dark Horse, now augmented with the cutting-edge Gen 6 Whipple twin-screw supercharger. This combination promises an exhilarating, adrenaline-pumping journey, highlighted by the thunderous roar of unleashed power.

Advanced Dual Cooling Technology: Elevate your driving experience with the 2024 Ford Mustang GT and Dark Horse, now outfitted with the revolutionary Whipple Gen 6 3.0L supercharger. Prepare to unleash your Mustang’s full potential as it transforms into an unmatched performance icon.

• Dark Horse power referenced. GTs equipped with the lower-flowing exhaust will result in 8-12HP less than noted.
• Power is under optimal conditions with 93-octane fuel. Results may vary due to conditions, octane, and dyno type.
• Not legal for sale or installation in California.

• Largest intercooler system on the market, featuring patented dual intercooler, dual-pass technology
• GT500 and Raptor R 92mm round throttle body
• No other upgrades required, just massive power right out of the box
• Front entry Gen 6 W185ax (3.0 liters/3000cc) Whipple twin-screw supercharger
• Gen 6 supercharger features a new Whipple rotor profile and optimized port shape for increased flow throughout the supercharger operating range
• 3.0L is 13% larger than the 2.65L roots-type, allowing lower power draw and lower discharge temps to flow the same amount of air (more power to the rear wheels)
• Oversized Crusher™ Y-Tube with dual 120mm openings designed for maximum airflow capacity vs dual throttle
• The inverted design allows for patented oversized dual intercooler dual-pass technology for industry-leading cooling capacity, allowing more power in all conditions
• 60% more intercooler capacity than the competitor
• High-flow Bosch intercooler pump for high flow and incredible cooling while getting quick recovery times.
• Whipple Superchargers massive oversized intercooled air-bypass system for industry-leading reduction of burst knock and incredible fuel economy (others recirculate hot air)
• Tomahawk V2 Whipple flash tool with data logging, code reading and erasing, updates, do-it-yourself installs, and Tire/Axle changes just a fingertip away.
• It fits both LHD and RHD-based S650 Mustangs.
• High flow, dual beam fuel injectors vs stock 17lb/hr stock injectors
• Exclusive 3×4 rotor combo for a significant increase in airflow under the curve than less efficient 4×4 roots
• More boost at the “hit” than any other twin-screw
• Flat torque curve for incredible acceleration
• Oversized heat exchanger for incredible intercooler water temps, 150% more volume than competition, standard with every kit
• It fits under the factory hood with no modifications
• No cutting or grinding on the engine block
• No cutting or grinding of the K-brace
• Kits come complete with all necessary parts and hardware for installation
• Plug-and-play wiring with male and female connections
• Proven 6-rib belt system with heavy-duty spring-loaded tensioner and adjustable idler system
• Optional 10-rib belt system with matching 6061 T6 billet pulleys
• OEM quick-connect fittings for easy installation
• Available in textured black, OEM matching colors, polished, Ford textured blue, or any custom color.
• Instant boost at the touch of the throttle
• Easy belt changes
• Lightweight pocketed 6061 T6 billet aluminum SC pulley
• Colder, Iridium Ford spark plugs included

First Class Customer Service & Satisfaction.

At Function Factory Performance, customer service is our top priority. We know that finding the right parts can be overwhelming, so we’re here to make the process smooth and enjoyable. We’re always ahead of the curve with our commitment to education and awareness. Let’s make this experience simple and awesome together! Don’t hesitate to call us at (480) 576-8606 or click here to reach us via email.

Make sure to follow us on Instagram: @FFPerformanceAZ and Youtube.

EMAIL A FACTORY SPECIALIST FOR HELP CALL A FACTORY SPECIALIST NOW