2010-2014 Ford F-150 SVT Raptor Carbon Fiber Hood Vents - Function Factory Performance
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
Function Factory Performance
Function Factory Performance ✓ Authorized
597 products at FFP
View All

2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent

Confirmed Fit: 2010–2014 Ford F150 Raptor
Real carbon fiber front hood vents for the 2010-2014 Ford F-150 SVT Raptor. Louvered panels drop into the factory hood openings to vent underhood heat and finish the hood in a deep 2x2 twill weave. Sold as a driver and passenger pair. Raptor-specific fitment, does not fit base F-150.
$359.98

or as low as $30.00/mo with Affirm

Available For Purchase
Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKUVENT-811-BKCF
BRANDFunction Factory Performance
FUNCTION FACTORY PERFORMANCE · VENT-811-BKCF
2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent

Real carbon fiber hood vents that finish the SVT Raptor's hood the way it should have left the factory. The louvered panels drop into the existing hood openings, pulling hot underhood air out and laying down a deep 2×2 twill weave that reads aggressive from across the lot. Direct-fit for 2010-2014 Raptor models only.

Fitment
2010-2014 F-150 SVT Raptor
Material
Real Carbon Fiber
Finish
Gloss 2×2 Twill Weave
Sold As
Driver + Passenger Pair

The first-gen Raptor came with functional hood openings, but the factory plastic inserts sit flat and disappear into the paint. These carbon fiber vents fill that gap with purpose. Each louvered panel is laid in real woven carbon, clear-coated to a wet gloss, and shaped to follow the contour of the Raptor hood so the slats sit flush and the airflow path stays open. Hot air coming off the engine has a clean exit, and the truck finally looks as serious as it drives.

This is a two-piece set for the driver and passenger openings, and it installs without cutting or modifying the hood. Carbon keeps the weight down compared to the OEM pieces while standing up to sun, heat, and trail abuse. Fitment is Raptor-specific. It will not fit base F-150 hoods, which do not carry the same vent openings, so confirm you have a 2010-2014 SVT Raptor before ordering.

What Sets It Apart

01

Real Woven Carbon

Genuine carbon fiber with a tight 2×2 twill weave, not a hydro-dipped or printed look-alike. The weave runs straight across both panels for a matched, factory-clean appearance.

02

Functional Louvers

Open louvered slats let trapped underhood heat escape through the Raptor's existing hood openings, helping airflow and heat dissipation on road and on the trail.

03

Raptor-Specific Fit

Shaped to the contour of the 2010-2014 SVT Raptor hood so the panels sit flush in the factory openings. Does not fit base-model F-150 hoods.

04

Driver + Passenger Pair

Ships as a matched two-piece set covering both front hood openings, so the whole hood is finished in one order.

05

Lightweight & Durable

Carbon construction trims weight versus the OEM inserts while shrugging off sun, heat cycling, and off-road vibration.

06

Wet Gloss Clear Coat

A UV-stable clear coat locks in the depth of the weave and keeps the gloss from hazing under constant sun and desert running.

On the Truck

2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent installed

Install Notes

Confirm your truck is a 2010-2014 F-150 SVT Raptor with factory hood vent openings before starting. Base F-150 hoods are not compatible.
Clean both hood opening areas with isopropyl alcohol and let them fully dry so the adhesive and panels seat properly.
Dry-fit the driver and passenger panels first to verify louver direction and flush alignment in each opening before committing.
Work in a shaded, moderate-temperature area. Direct sun and a hot hood can cause adhesive to grab before the panel is aligned.
Press each panel evenly from the center outward to seat it fully, then let the install cure undisturbed before driving or washing.

Technical Specs

Spec Detail
Brand Function Factory Performance
Part Number VENT-811-BKCF
Fitment 2010-2014 Ford F-150 SVT Raptor
Material Real Carbon Fiber
Finish Gloss 2×2 Twill Weave Clear Coat
Location Front Hood Vents
Sold As Pair (Driver + Passenger)
Function Underhood Heat Extraction / Aero Styling
Shipping Weight 10 lb
Fitment Note Does NOT fit base-model F-150

Honest Pricing. Real Support.

We price this exactly where the brand sets it — no markup games — and back it with a team that actually knows these trucks. Free ground shipping in the contiguous US.

Fitment: Fits 2010-2014 Ford F-150 SVT Raptor models only. Does NOT fit base-model F-150, which does not have the factory hood vent openings. Confirm your truck is an SVT Raptor before ordering.

Reviews

There are no reviews yet

Be the first to review “2010-2014 Ford F-150 SVT Raptor Carbon Fiber Front Hood Vent”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762 EMAIL SUPPORT

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close