2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents - Function Factory Performance
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
Function Factory Performance
Function Factory Performance ✓ Authorized
593 products at FFP
View All

2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents

Confirmed Fit: 2010–2014 Ford F150 Raptor
Genuine carbon fiber side fender vents for the 2010-2014 F-150 SVT Raptor. A gloss twill-weave, bolt-on pair molded off the OEM vents with SVT lettering retained — replaces the factory gray plastic for a finished front-end look.
$209.98

or as low as $17.50/mo with Affirm

Available For Purchase
Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKUVENT-728-BKCF
BRANDFunction Factory Performance
FUNCTION FACTORY PERFORMANCE · VENT-728-BKCF
2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents

A direct-fit pair of real carbon fiber side fender vents for the 2010-2014 F-150 SVT Raptor — molded to the factory fender opening, finished with a glossy twill weave, and stamped with the SVT lettering. They drop straight onto the OEM mounting points to swap the truck's gray plastic vents for a finish that actually looks the part.

Material
Genuine Carbon Fiber
Finish
Gloss Twill Weave
Fitment
2010-2014 F-150 Raptor
Sold As
Pair (Driver + Passenger)

The factory Raptor wears flat gray plastic vents on each front fender — functional, but they leave the truck looking unfinished next to a hood that's already begging for carbon. These vents replace them one-for-one with hand-laid carbon fiber under a deep gloss clear coat, so the twill grain catches light from across a parking lot. The integrated SVT lettering is retained, so the upgrade reads as a sharper version of the factory design rather than a generic swap.

Each vent is molded off the OEM piece, which means the curvature, the louver spacing, and the mesh backing all match the original fender contour. They locate on the existing tabs and openings with no fender cutting or trimming, and the pair ships ready to mount on both the driver and passenger sides. The result is a clean, cohesive front-end look that ties into a carbon hood, mirror caps, or grille without the gray-plastic break in between.

What Sets It Apart

01

Genuine Carbon Fiber

Hand-laid carbon fiber construction — not a hydro-dipped or vinyl-wrapped plastic vent. Real woven cloth under a UV-stable clear coat.

02

Gloss Twill Weave

A tight 2×2 twill pattern finished in high-gloss clear that keeps the grain crisp and resists fading from sun and weather.

03

SVT Lettering Retained

The factory SVT script is preserved on each vent, so the carbon upgrade looks like a factory-plus piece instead of an aftermarket replacement.

04

Molded From OEM

Each vent is shaped off the original Raptor fender vent, matching the louver layout, mesh backing, and fender curvature for a flush, factory-correct fit.

05

Bolt-On Pair

Sold as a complete left-and-right set that mounts to the existing fender openings and tabs — no cutting, no trimming, no fender modification.

06

Front-End Cohesion

Ties the fenders into a carbon hood, grille, or mirror caps so the whole front clip reads as one finished look instead of mixed materials.

On the Truck

2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents installed

Install Notes

Confirm fitment: these are built for the 2010-2014 F-150 SVT Raptor with the factory steel fender — they will not fit aftermarket replacement Raptor fenders.
Pop the hood and locate the factory plastic fender vents on each side; remove the OEM vents by releasing the retaining tabs from inside the fender opening.
Dry-fit each carbon vent to confirm orientation (driver vs. passenger) and verify the SVT lettering sits upright and the louvers seat flush against the fender.
Secure each vent to the existing mounting tabs and openings; for a permanent hold, a bead of automotive-grade adhesive or 3M VHB tape along the contact edges keeps the vent locked to the fender.
Wipe the contact surfaces with isopropyl alcohol before bonding, press firmly, and let any adhesive cure fully before washing or driving in wet conditions. Budget about 30-45 minutes for the pair.

Technical Specs

Spec Detail
Brand Function Factory Performance
Part Number VENT-728-BKCF
Material Genuine Carbon Fiber
Surface Finish Gloss Twill Weave
Fitment 2010-2014 Ford F-150 SVT Raptor
Position Front Fenders (Left + Right)
Sold As Pair
Installation Bolt-On / Direct Replacement
SVT Lettering Retained

Honest Pricing. Real Support.

We price this exactly where the brand sets it — no markup games — and back it with a team that actually knows these trucks. Free ground shipping in the contiguous US.

Fitment: Fits 2010, 2011, 2012, 2013, and 2014 Ford F-150 SVT Raptor models with the factory OEM steel fender. Not compatible with aftermarket replacement Raptor fenders. Direct replacement for the factory plastic fender vents — sold as a complete left-and-right pair.

Reviews

There are no reviews yet

Be the first to review “2010-2014 Ford F-150 SVT Raptor Carbon Fiber Side Fender Vents”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762 EMAIL SUPPORT

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close