2021-2025 Ford F-150 Carbon Fiber Console Side Panel Trim - Function Factory Performance
YOUR BUILD STARTS HERE Expert Installs Thousand Oaks, CA
805-267-9762 — Tap to Call
Authorized Dealer • Expert Installation • Thousand Oaks, CA
Discount Code: FFPERFORMANCE
805-267-9762
Function Factory Performance
Function Factory Performance ✓ Authorized
590 products at FFP
View All

2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover

Confirmed Fit: 2021–2025 Ford F150 All
Genuine dry prepreg carbon fiber center console side panel trim covers for the 2021-up Ford F-150. Sold as a pair with a gloss twill finish and pre-applied 3M tape-on adhesive for a clean, factory-style direct fit, Raptor and Lightning included.
$229.98

or as low as $19.17/mo with Affirm

Available For Purchase
Authorized Dealer
Guaranteed Fit
🔒
Secure Checkout
💬
Expert Support
SKUVENT-998-BKCF
BRANDFunction Factory Performance
FUNCTION FACTORY PERFORMANCE · VENT-998-BKCF
2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover

Real dry prepreg carbon fiber for the most-touched corners of your F-150 cabin. This factory-style side panel trim cover pair wraps the center console flanks in glossy twill weave, turning the bare plastic next to the climate stack and shifter into a finished, purpose-built upgrade. Direct fit for 2021-up F-150, including Raptor and Lightning trims.

Material
Dry Prepreg Carbon Fiber
Finish
Gloss Twill Weave
Install
Tape-On (3M Pre-Applied)
Fitment
2021-Up F-150

The center console side panels sit right where your knee, your passenger's leg, and every set of grabbing hands land. From the factory, that's a slab of textured black plastic that scuffs and looks tired fast. This pair of covers caps both flanks in genuine dry prepreg carbon fiber, matching the depth and gloss of the rest of a built-out F-150 interior instead of faking it with a printed hydro-dip film.

Each cover is autoclave-cured from prepreg sheet, so the weave is consistent, the resin is fully wet out, and the part stays dimensionally true to the factory panel it sits over. The contour follows the console's step and curve so the covers hug the surface with no gaps or lifted edges. Pre-applied 3M automotive adhesive means it bonds permanently the first time you set it down, no clips, no screws, no trips to the dash to undo a panel.

What Sets It Apart

01

Genuine Dry Prepreg Carbon

Autoclave-cured prepreg sheet, not cheap forged offcuts or printed film. The twill weave runs true and the surface carries a deep, glassy clear coat that holds up to cabin UV.

02

Pair, Both Sides Covered

Driver and passenger console flanks both get capped, so the carbon reads as a continuous, finished surface instead of one lonely accent panel.

03

Factory-Style Contour

Molded to the exact step and curve of the 2021-up console side panel, the cover seats flush with no gaps, lifted corners, or fighting the shape on install.

04

3M Tape-On Install

Pre-applied 3M automotive-grade adhesive backing. Clean the surface, peel, set, press. No fasteners, no drilling, no dropping the console trim.

05

Guards the Scuff Zone

The console sides are a constant contact point for knees and shoes. The carbon shell takes the abuse so the factory plastic underneath stays untouched.

06

Built to Match the Cabin

Pairs cleanly with the rest of an F-150 carbon interior, dash trim, climate surround, and shifter panels, for a cohesive cockpit instead of one-off accents.

On the Truck

2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover installed2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover installed2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover installed2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover installed

Install Notes

Park on a warm day or warm the cabin to roughly 70F+ so the 3M adhesive bonds at full strength; cold surfaces weaken the tack.
Thoroughly clean both factory console side panels with isopropyl alcohol and let them flash dry. Any wax, dust, or residue will compromise the bond.
Dry-fit each cover first, no tape removed, to confirm orientation and edge alignment against the console contour before committing.
Peel the 3M backing, align the top edge first, then roll the cover down onto the panel and press firmly along the full surface, working out any air.
Hold firm pressure for 30 to 60 seconds per panel and avoid heavy contact or cleaning for 24 to 48 hours to let the adhesive reach full cure.

Technical Specs

Spec Detail
Brand Function Factory Performance
Part Number VENT-998-BKCF
Material Dry Prepreg Carbon Fiber
Surface Finish Gloss Carbon Fiber (Twill Weave)
Construction Autoclave-Cured Prepreg
Style Factory-Style Direct Fit
Location Center Console Side Panels (Pair)
Installation Tape-On, Pre-Applied 3M Adhesive
Fitment 2021-Up Ford F-150 (incl. Raptor & Lightning)
Package Includes 2x Center Console Side Panel Trim Covers

Honest Pricing. Real Support.

We price this exactly where the brand sets it — no markup games — and back it with a team that actually knows these trucks. Questions on fitment before you buy? A real person answers. Free ground shipping in the contiguous US.

Fitment: Direct fit for 2021-2025 Ford F-150, all trims including non-Raptor, Raptor, and F-150 Lightning. Covers the driver and passenger center console side panels.

Reviews

There are no reviews yet

Be the first to review “2021-2025 Ford F-150 Carbon Fiber Center Console Side Panel Trim Cover”

Your email address will not be published. Required fields are marked *

Drag photos here or browse

🤖

Not sure if this fits your build? Ask Senna.

Our AI assistant knows every product on the site and can check compatibility, suggest alternatives, and answer technical questions.

💡 Quick Answers

FREQUENTLY ASKED QUESTIONS

📦 What happens after I order? +

You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.

Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.

Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.

🚚 Do you send tracking with my order? +

Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.

If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.

🛡 What if my parts get lost or damaged? +

Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.

If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.

What can I do to help FFP? +

Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.

Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁

🏎
Ready to Order?

1ST CLASS SERVICE

805-267-9762 EMAIL SUPPORT

Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.

📞 Click To Call Now

Follow us for builds, tips & giveaways

@FFPerformanceAZ
👤
Customer Support Specialist
Product Guaranteed
🏁
Race Proven Knowledge
🔒
Payments Verified
📞 Call Expert
Popular Searches
Search for parts
Try "C8 exhaust" or "Mustang intake"
Navigate Enter Select Esc Close