2024-2026 Ford Mustang S650 Dark Horse SC Front Bumper Conversion Kit
Six pieces that bolt the Dark Horse SC face onto your 2024-2026 Ford Mustang S650. Full bumper cover, upper and lower grilles, side intake grilles, lip splitter, and corner winglets, all 3D-scanned 1:1 off the factory Dark Horse parts. Molded in OE-grade polypropylene and primed for paint. It bolts to OEM mounting points on any GT or EcoBoost, Coupe or Convertible. No cutting, no drilling.
or as low as $82.50/mo with Affirm
Bolt the Dark Horse face onto your Mustang.
This S650 Dark Horse front bumper kit swaps your GT or EcoBoost front end over to the Dark Horse SC look. Six pieces, 3D-scanned 1:1 off the factory parts and bolted to OEM mounting points. No cutting, no drilling, nothing permanent.
The S650 Dark Horse front bumper kit, in one box.
Your S650 GT and the Dark Horse rolled out of the factory with two different faces. This kit closes that gap. It is a full front fascia conversion for the 2024-2026 Ford Mustang S650, not a chin spoiler and not a stick-on lip.
It rebuilds the entire nose of the car into the Dark Horse SC profile: bumper cover, upper and lower grilles, side intake grilles, lip splitter, and corner winglets. Because every piece is 3D-scanned straight off the factory Dark Horse parts, the panel gaps and body lines land exactly where Ford put them.
Built to factory standards.
Every piece comes off a 1:1 3D scan of the factory Dark Horse SC parts. The geometry, the body lines, and the proportions match because they were copied straight from the source.
Molded from high-strength polypropylene, the same material your factory bumper is made of. It flexes instead of cracking, shrugs off parking-lot taps, and holds its shape in the heat.
It comes in primer, ready for a body shop to scuff, prep, and lay down your color. The surface is smooth, so the paint grabs clean and matches the rest of the car.
Bumper cover, both grilles, side intake grilles, lip splitter, and corner winglets. Everything to rebuild the front of the car is in the kit. Nothing else to chase down.
See it on the S650.
The Dark Horse SC front end on a finished 2024-2026 S650. Full conversion, factory-style fitment, the exact stance this kit gives the car. Hit play.
Every angle.
The conversion shot from every angle on a finished S650: the new nose, the corners, the splitter, the grilles, the winglets. Tap any photo to open it full-size.
Six pieces. One complete front end.
This kit replaces the entire factory front fascia. Every piece is in the box. Mounting hardware is included, and you reuse your factory clips and brackets where they carry over.
- ✓Full Replacement Bumper Cover. The complete front bumper, and the foundation the whole conversion is built on.
- ✓Front Upper Grille. Sets the Dark Horse SC face and the factory-style upper opening.
- ✓Front Lower Grille. The wide lower opening that gives the nose its aggression.
- ✓Side Air Intake Grilles. OEM-style intake detail on both sides of the bumper.
- ✓Front Lip Splitter. The lower splitter that drops the front end and sharpens the profile.
- ✓Corner Winglets. The front corner winglets that finish off the motorsport look.
The detail.
Studio shots of the parts and close-ups from around the front end. Tap any photo to open it full-size.
Specifications.
- Kit Type
- 6-Piece Front Conversion
- Material
- OE-Grade Polypropylene
- Finish
- Primed Black, Paint-Ready
- Tooling
- 3D-Scanned 1:1 From OEM
- Fitment
- 2024-2026 Mustang S650
- Trims
- GT & EcoBoost
- Body
- Coupe & Convertible
- Install
- Direct Bolt-On, No Cutting
- Hardware
- Reuses Factory Clips & Brackets
- Backed By
- Function Factory Performance
Direct bolt-on conversion. It uses the factory mounting points and OEM body attachment locations, so there is no drilling, no cutting, and nothing permanent. It is involved work, so plan on a body shop for the install and the paint. Test-fit every piece before it goes to the booth.
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762 EMAIL SUPPORTCar parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet