ESR AX160 Full Turn Key Racing Simulator - Drifting
or as low as $1,166.67/mo with Affirm
Available
AX160 Full Turn-Key — Drifting Edition
Same AX160 flagship chassis. Same 160mm aluminum profile, zero-torsion build, and full accessory ecosystem. This is the turn-key drifting package — wheel base, wheel, pedals, shifter, handbrake, seat, and full chassis, shipped pre-configured and ready to race. Skip the configurator, skip the order-picking, skip the compatibility questions.
Same AX160 Flagship Frame
This isn’t a cheaper alternative — it’s the same AX160 chassis you’d pick a la carte, bundled with a full drifting setup. 160mm aluminum profile, zero torsion, rated to 32 Nm direct-drive. The chassis you buy here races head-to-head against the chassis you’d build yourself.
- 160mm aluminum extrusion — same as standalone AX160
- Zero-torsion T-slot build — no welds, no flex
- Rated for full-force direct-drive feedback up to 32 Nm
Tuned For Angle, Not Apex
Drifting needs a different pedal and handbrake geometry than grip racing. This package is pre-configured — handbrake on the correct side, shifter at the right height, pedal spacing tuned for heel-toe and left-foot braking. You unbox, bolt, and drift. No guessing at whether your handbrake is in the right spot.
- Handbrake — side-mounted for drift-style use
- Shifter — sequential for quick up/down during drift chains
- Pedal spacing — tuned for heel-toe and left-foot braking
No Order-Picking, No Compatibility Questions
If you’ve been delaying because the configurator is overwhelming, this is your answer. Full chassis, full electronics, pre-paired components, calibrated for drift-style use. Ships as one crated package, assembles in 2–3 hours, and runs the first session without you needing to Google compatibility between brands.
- Pre-selected, compatibility-tested component stack
- Single-crate shipping — one pallet, one delivery
- First-session ready — tuned drifting baseline included
Same Chassis As Standalone AX160 — Watch Every Chapter
This turn-key package ships the same AX160 chassis you’d build from the configurator. The build series below documents the full frame-to-first-lap assembly from our community. Watch before it arrives or bookmark for delivery day.
Chapter 01
Frame Assembly
Chapter 02
Accessories Install
Chapter 03
SIMAGIC Hardware Setup
Chapter 04
First Gameplay + Drift Setup
Overview
The AX160 Full Turn-Key Racing Simulator — Drifting bundles the complete AX160 flagship chassis with a pre-configured drifting electronics package. Same 160mm aluminum profile, same zero-torsion build, same 32 Nm direct-drive rating as the standalone AX160 — but pre-paired with a wheel base, wheel, pedals, shifter, handbrake, and seat tuned specifically for drift-style use in iRacing, CarX Drift Racing, Assetto Corsa, and formula drift sim content.
Ships as one crated turn-key package. Assembles in 2–3 hours. First-session ready. Same 5-year chassis warranty.
Fitment & Compatibility
| Category | Supported |
|---|---|
| Chassis | AX160 160mm aluminum profile — flagship spec |
| Wheel base | Pre-paired direct-drive system — drift-tuned torque profile |
| Pedals | Pre-paired load-cell or hydraulic set with drift-tuned spacing |
| Shifter | Sequential shifter — up/down quick-shift drift use |
| Handbrake | Dedicated hydraulic handbrake — side-mounted for drift-angle use |
| Seat | Racing bucket seat included — multiple color combos |
Build & Construction
| Property | Spec |
|---|---|
| Chassis profile | 160mm aluminum extrusion, anodized finish (same as standalone AX160) |
| Rigidity | Zero-torsion T-slot build — no welds, no flex under 32 Nm |
| Stability | Rubberized leveling feet + caster wheels for repositioning |
| Package format | Single crate, palletized delivery |
| Warranty | 5-year AX160 chassis warranty + per-component electronics warranty |
Installation Notes
- Footprint — same as standalone AX160: 5.5′ × 4.5′ floor space + clearance.
- Delivery — ships crated, palletized. Lift-gate recommended at destination.
- Solo-build time — 2–3 hours (longer than chassis-only AX160 due to pre-wired electronics).
- Drift setup — handbrake side, shifter height, and pedal spacing are pre-tuned for drift-style use; adjust if you want a more grip-oriented baseline.
- First session — dial in wheel force, pedal pressure, and handbrake threshold before running a session. A quick calibration pass is in the delivered manual.
- Software — CarX Drift Racing, iRacing, Assetto Corsa all work out of box. SimHub + CrewChief optional.
White Glove Service
Optional at checkout — two tiers when available:
- Local delivery & consultation ($3,000) — we deliver to your Southern California location, assemble on-site, calibrate your wheel base + pedals to your height and brake pressure, and run a tuning session with you on iRacing / ACC / Assetto Corsa. You leave with a working baseline setup.
- Out-of-state delivery + Discord consultation ($4,500) — ships crated and palletized. We join you live on Discord for up to 3 hours covering assembly, calibration, software (SimHub, CrewChief, Moza Pit House, SIMAGIC Orbit), and first-session coaching.
What’s Included
- Complete AX160 160mm aluminum chassis — same spec as standalone AX160
- Pre-paired direct-drive wheel base (drift-tuned torque)
- Pre-paired steering wheel — drift-style
- Load-cell or hydraulic pedal set
- Sequential shifter
- Hydraulic handbrake, side-mounted
- Racing bucket seat
- All mounting hardware, T-slot nuts, corner brackets
- Organizers — cup holder, phone holder, rear PC/console tray
- Rubberized leveling feet + caster wheels
- Printed + digital assembly manual
- 5-year AX160 chassis warranty + electronics warranty per component
Installation & Support
Based in Thousand Oaks, CA. Shop rate $250/hr if you want us to assemble on-site or dial in the rig after delivery. Call 805-267-9762 or tap “Talk to Expert” to coordinate. We also run an active sim-racing Discord for setup sheets, telemetry reviews, and league scheduling — ask at checkout for an invite.
You Might Also Like
Trak Racer
Trak Racer
Extreme Simracing
Trak Racer
FREQUENTLY ASKED QUESTIONS
You'll get an instant confirmation email with your part details and invoice. We source from a network of authorized suppliers across the country, so lead times vary by brand and part type — we'll send a tracking number the moment your parts move.
Made-to-order builds — carbon fiber bodywork, fabricated systems, custom finish work — run longer than off-the-shelf items because they're built per order. You'll get progress updates throughout the build.
Need a specific timeline on a part before you buy? Call 805-267-9762 or hit the chat — we'll check vendor stock direct and give you a straight answer.
Absolutely! Once your order ships, you'll get an email with a tracking link so you can follow its journey from our shop to your doorstep.
If your order ships via freight, you'll get a separate email with a direct link to the carrier's tracking page — easy and stress-free.
Things happen on the road — even to boxes. If your order arrives damaged, snap a few clear photos of the box and product and send them our way right away.
If your shipment is lost, just email or call us — we'll help track it down and guide you through the next steps to make it right.
Simple — spread the horsepower! Follow us on Instagram, YouTube, and Facebook, and most importantly, drop us a review on Google or Yelp to let others know about your experience.
Your feedback helps us grow, create more content, and keep bringing performance-driven parts to the community. 🏁
1ST CLASS SERVICE
805-267-9762or email Support@FFPerformance.co
Car parts can be a maze — good thing we brought the map. Our team's here to keep things smooth, simple, and maybe even a little fun.
📞 Click To Call Now
Reviews
There are no reviews yet